BOBF Jetpack
UPDATE: We now have an accurate rocket, which fits down into the rocket launcher. You can also purchase extra rockets!
This is our version of the new Boba Fett jetpack.
Our jet pack kits are the most accurate, and the most cost effective kits available anywhere period! Other kits are too expensive, poor quality, inaccurate, or simply crazy hard to build! Those are now troubles of the past!
It features moving rocket fins, and thrusters. The back can be removed to insert electronics, and there are channels for wiring. The channels go to the beacon, side led panel, and to the thrusters. The rocket can be removed for easy handling!
The mounting system interfaces with our backplate using the screen accurate mounts seen in the show.You will need the following hardware to mount the jetpack to our backplate.
2x M5x25 Screws
2x M5 Nuts
2x M3x20 Screws
2X M3x25 Screws
4x M3 Nuts
There is not a more accurate version available period! If you find any inaccuracies let us know and we will push updates!SIZING: Temuera Morrison is 5'7" tall. This is meant to be screen accurate for a man around his size and weight but will also fit a skinny guy up to 6' or so depending on shoulder width and weight (thickness!). If you want us to scale this down then please enter your dimensions in the order notes section. If you need us to scale it up please contact us, with your dimensions, and we will give you an estimate. We may have to make additional cuts if scaled up.
Measurments: We need your height, chest circumference, stomach circumference, and shoulder width measured at the arm pit. Use our measurement tool to simplify the process of taking and recording measurements. https://3dcauldron.com/pages/measurements
We can scale to the dimensions you specify, or use your body measurements to scale accurately for you.
Instructions
We have included some filament to secure the rocket fins. You may choose to replace it with something metal such as a coat hanger.
When installing the rocket fins, insert the filament or other pin and trim it so that it is flush.To secure the thrusters slide the thruster onto the thruster mount. Then insert the filament into the channel inside the thruster nozzle. Trim the excess, but leave some extra for later dissasembly. This prevents the thruster from falling off but allows it to spin.
